ALL REPAIRS ARE DONE LOCALLY NO TIME WASTE PROMISE

WE FIX YOUR XBOX OR PS3 FATS AND RIGHT!
Experienced & Certified Technicians
Fast & Reliable Service
In Touch with latest Information Technology
Same management & same great service for over 10 Years

"If It Has A Plug Or A Circuit, We Can Usually Fix It!"

problem with the Xbox360. Some of the symptoms may start out as overheating problems which will show up as two flashing lights, this is a sure sign that the RRoD will soon be following. This is caused by excessive heat buildup, that’s simply not dissipated properly. This is usually due to either not enough heat sink compound, or the breakdown of the heat sink compound under thermal stress. The excessive heat then causes the solder balls under the BGA IC’s to develop cold solder joints, thus leading to the above mentioned symptoms.
	does the image look familiar
The XBox360 RRoD Solution : Upwards of 70% of all XBox360’s only need to have the GPU reflowed, to restore the unit to proper operating condition. This can be accomplished quickly and easily by using the Jovy Systems’ RE-7500 Rework Station. System comes complete with X-Y table included. Everything you need to start servicing the XBox 360 is included. You’re ready to go, right out of the box. (Includes 3 downloadable xbox specific profiles)
The Game Consoles (Xbox and PS3) Reballing Solution: Want to get your systems repaired and repaired properly we can do it for you.

problem with the Xbox360. Some of the symptoms may start out as overheating problems which will show up as two flashing lights, this is a sure sign that the RRoD will soon be following. This is caused by excessive heat buildup, that’s simply not dissipated properly. This is usually due to either not enough heat sink compound, or the breakdown of the heat sink compound under thermal stress. The excessive heat then causes the solder balls under the BGA IC’s to develop cold solder joints, thus leading to the above mentioned symptoms.

xbox

does

the image look familiar

RING OF DEATH

The XBox360 RRoD Solution :

Upwards of 70% of all XBox360’s only need to have the GPU reflowed, to restore the unit to proper operating condition. This can be accomplished quickly and easily by using the Jovy Systems’ RE-7500 Rework Station. System comes complete with X-Y table included. Everything you need to start servicing the XBox 360 is included. You’re ready to go, right out of the box. (Includes 3 downloadable xbox specific profiles)

The Game Consoles (Xbox and PS3) Reballing Solution:

Want to get your systems repaired and repaired properly we can do it for you.

There is a lot of information on the internet about game station repair. The Aoyue 968 is the most popular hot air rework station to use for reflowing. We have found out that the use of a bottom heater is critical in achieving a high sucess rate. The board needs to be clamped tightly to prevent warping. Early on in the work, people used a Aoyue 853A or a Walmart griddle, but we realized this was not giving very high success rates.

This summer the Aoyue 883 preheater was developed which is large enough to hold the XBox and PS3 Boards. The main advantage of the 883 is it's ability to program a profile. The use of a profile is important to revent thermal shock to the board.

Also it is important to note the 75% of the heat should come from the bottom heater. Early on it was thought that the top heat was more important, but we have learned that the bottom is more critical due to the fact that the solder pads are much closer to the bottom of the board than the top of the board.

DELL Solution provider